Description:
Multi-function card power distribution cabinet adopts "step-by-step delayed power on" to avoid the instantaneous impact of large loads on the power grid, effectively protect the electronic components of the display body and prolong the service life of the display, with the use of multi-function card to improve the overall performance of the LED system.
Features:
* Manual control: start and stop with one click, power on and off step by step
* Time control: set 4 groups of control time periods
* With high temperature power outage, surge, short circuit, overcurrent, overload and other protection functions
* Built-in lightning arrester, with lightning protection function, level II lightning protection
* The power distribution cabinet contains multi-function card control, with remote control function, RS232 serial port or Gigabit network port communication
* Through the LED display intelligent control system software and the multi-function card, operations such as power monitoring, temperature monitoring, and brightness adjustment (need to be equipped with a light probe) are realized
* Equipped with an emergency start module. When the CNC panel fails, the emergency start module can be plugged in and powered on.
Specification:
|
Input |
|
|
Rated power |
10KW |
|
Input voltage |
3-phase 5-wire AC380V±10%, the power frequency is 50Hz±5% |
|
Output |
|
|
Output channels |
3 channels |
|
Single channel power |
≤3.5KW |
|
Output voltage |
Single-phase three-wire system AC220V±10% |
|
Other introduction |
|
|
Installation method |
Wall-mounted |
|
Output selection switch |
D32A*1P |
|
AC contactor |
(Rated current 32A)*1 |
|
Rated current |
16.8A, main circuit breaker current: 32A |
|
Ambient relative humidity |
10%—80% |
|
Operating temperature |
‐10℃—+60℃ |
|
Enclosure rating |
IP30 |
|
Cabinet size (height*width*thickness) |
400mm*300mm*130mm |
|
Equipment weight |
≤7Kg |
|
Equipment material |
Iron box (surface painted wrinkled white) |
|
Built-in safety switch and 10A-16A three-hole maintenance socket |
|